CarPro Denim Orange Peel Removal Pad

Description

CarPro Denim Orange Peel Removal Pad

With our CARPRO USA Velvet and Denim Orange Peel Removal pads you can now remove or substantially reduce orange peel in the top layer without sanding. While removing orange peel and deep defects you are also polishing the paint rather than leaving sanding marks which reduces the steps needed afterwards.

Type of Product: Pad

STEPS OF USE:

Attach to hook & loop backing plate with rotary polisher for best results.
Apply a few drops of Scholl Concepts S3 Gold XXL to paint or pad according to your skills and preference.
Work a 2' x 2' section or larger to keep heat down as needed but remember the larger the area the more time it will take to level orange peel and defects.
Begin working polish on low speed for a pass.
Step up speed to approximately 1100 rpm (adjust as needed).
With proper lighting observe the level of orange peel removal while you work noting precise surface contact without pressure to level ridges.
After completing each section wipe off paint with soft microfiber towel.
Brush pad in direction of fibers to remove residue.
Apply a couple more drops of polish for next section.
Switch out pads as needed when cut has been compromised and set aside to clean by hand.